Contact Us

Ark Fiber Tech Co.,Ltd
2Floor,A Bld, #134 Qianjing Rd, Baoan Dis., Shenzhen
Telephone:86-755-85251801
Mobile:86-13530240369
E-mail: shawn@arkoptics.com
E-mail: ava@arkoptics.com


Home > News > Content
Mpo Fiber Cabling Considerations
Dec 24, 2018

1. When the mpo fiber jumper is not connected, do not pull out the dust cap of the jumper in advance to prevent contamination damage on the jumper end.

2. When wiring the mpo fiber, do not touch the end of the mpo fiber connector. Otherwise, the loss of the fiber link will be too large. If you accidentally touch the end face of the mpo fiber connector, clean it with an mpo cleaner before docking.

3. When wiring mpo fiber, do not pull or squeeze the fiber jumper to avoid damage to the fiber jumper.

4. When docking the Mpo fiber connector, you will hear the “beep” sound, which means the docking position, otherwise you need to re-plug and dock.