1 Channel CWDM OADM
CWDM OADM 1 Channel, Dual Fiber or Single Fiber, Dual-Sided (East and West) and Single-Sided (East or West) Configurations, Monitor and 1310nm Port Optional, Arkoptics
Description
Custom CWDM Add Drop Multiplexer
CWDM OADM solutions are used in WDM systems to multiplex and route different channel wavelengths into or out of a single mode fiber. It is ideal for creating a CWDM bus network by connecting two OADM devices together and work with a Mux Demux.
Interconnected Two-Sided CWDM OADMs can set up a adding and dropping bus network. Wavelengths can be reused in the fiber link.
Connected between CWDM Multiplexers, CWDM OADM can drop out specific wavelengths from the line for applications and then add these wavelengths back to the line to transit to the designated locations.
Customized CWDM OADMs are perfectly tailored to meet with specific needs. Any wavelength, any connector, any housing and any special ports can be implemented. Available with 1U rack, 1U slot rack and plug-in modules for higher density data center application. Custom panels with logos, clear channels and Tx/Rx indications for easy patching.
Specifications
| CWDM OADM |  1CH CWDM OADM |  2CH CWDM OADM |  4CH CWDM OADM | 1CH CWDM OADM | 2CH CWDM OADM | 4CH CWDM OADM |
| Transmission Direction | East and West | East and West | East and West | East or West | East or West | East or West |
| Technology Type | TFF(Thin-Film-Filter) | |||||
| Channel Spacing | 20nm | |||||
| Channel Passband | λc ±6.5nm or ±7nm | |||||
| Passband Ripple | ≤ 0.3dB | |||||
| Insertion Loss Bypass | ≤ 0.8dB | ≤ 1.4dB | ≤ 2.2dB | ≤ 0.5dB | ≤ 0.6dB | ≤ 1.0dB |
| Insertion Loss Add-Drop | ≤ 0.8dB | ≤ 1.2dB | ≤ 1.6dB | ≤ 0.8dB | ≤ 1.2dB | ≤ 1.6dB |
| Insertion Loss +1% Monitor | 0.6dB Additional | 0.6dB Additional | 0.6dB Additional | 0.3dB Additional | 0.3dB Additional | 0.3dB Additional |
| Insertion Loss +1310nm Port | 0.6dB Additional | 0.6dB Additional | 0.6dB Additional | 0.3dB Additional | 0.3dB Additional | 0.3dB Additional |
| Channel Isolation | Adjacent≥30dB; Non-adjacent≥45dB | |||||
| Bypass Isolation | ≥25dB | |||||
| Directivity | ≥50dB | |||||
| Return Loss | ≥45dB | |||||
| Polarization Dependent Loss | ≤ 0.2dB | |||||
| Polarization Mode Dispersion | ≤ 0.2ps | |||||
| Power Handling | ≤ 500mW | |||||
| Fiber Type | ITU-T G657 A1 | |||||
| Connector Type | LC UPC or Other Conn. | |||||
| Operating Temperature | -20°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Dimension | Plug-in Module 1RU 19” Rack Mount | |||||
