2 Channel DWDM OADM
DWDM OADM 2 Channel, Single-Sided (East or West) and Dual-Sided (East and West) Configurations, Dual Fiber or Single Fiber, Monitor and 1310nm Port Optional, Arkoptics
Description
Description
DWDM OADM module can realize two-way (east and west) or one-way (east or west) signal transmission. Access points can be added to linear, bus and ring networks, and the east-west ring design has the role of redundant protection architecture.
East or West one way transmission is to drop or add specific wavelength channels from the optical fiber and allow other channels to pass directly through the network access point.
The two-way transmission between east and west is to drop a separate channel from the fiber and then add the same channel back to the fiber.
Arkoptics DWDM OADMs are avaible with different package, like ABS, 1U 19” Casing, 1U 2 Slot Cassette and 1U 4 Slot Cassette. They are modular, scalable and are perfectly suited to 10/1G Ethernet, 16/8/4/2/1G FC, SDH/SONET, Video, CATV, FTTx applications.
Dual & Single Fiber 2 Channel DWDM OADM
Available in Dual-Sided (East and West) and Single-Sided (East or West) Configurations
–Based on thin film filter with epoxy free optical path
–Low insertion loss
–Monitor and 1310nm port for multi-functions
–Compliant with all optical networking products (ITU Grid)
–Protocol transparent (support 1G, 10G etc.)
–Completely passive, no power or maintenance required
–LC/SC/FC/ST various connectors available, UPC or APC polish
–Ideal for DWDM ring structures or daisy chain applications
–Fully compliant with CE, FCC, ISO, ITU-T G.694.2, RoHS, Telcordia GR1209 and GR1221
Specifications
| DWDM OADM |  1CH DWDM OADM |  2CH DWDM OADM |  4CH DWDM OADM | 1CH DWDM OADM | 2CH DWDM OADM | 4CH DWDM OADM |
| Transmission Direction | East and West | East and West | East and West | East or West | East or West | East or West |
| Technology Type | TFF(Thin-Film-Filter) | |||||
| Channel Spacing | 100GHz (0.8nm) | |||||
| Channel Passband | +/-0.125nm | |||||
| Passband Ripple | ≤ 0.5dB | |||||
| Insertion Loss Bypass | ≤ 1.0dB | ≤ 1.8dB | ≤ 2.5dB | ≤ 0.5dB | ≤ 1.0dB | ≤ 1.5dB |
| Insertion Loss Add-Drop | ≤ 1.0dB | ≤ 1.6dB | ≤ 2.0dB | ≤ 1.0dB | ≤ 1.6dB | ≤ 2.0dB |
| Insertion Loss +1% Monitor | 0.6dB Additional | 0.6dB Additional | 0.6dB Additional | 0.3dB Additional | 0.3dB Additional | 0.3dB Additional |
| Insertion Loss +1310nm Port | 0.6dB Additional | 0.6dB Additional | 0.6dB Additional | 0.3dB Additional | 0.3dB Additional | 0.3dB Additional |
| Channel Isolation | Adjacent≥30dB; Non-adjacent≥45dB | |||||
| Bypass Isolation | ≥13dB | |||||
| Directivity | ≥50dB | |||||
| Return Loss | ≥45dB | |||||
| Polarization Dependent Loss | ≤ 0.2dB | |||||
| Polarization Mode Dispersion | ≤ 0.2ps | |||||
| Power Handling | ≤ 500mW | |||||
| Fiber Type | ITU-T G657 A1 | |||||
| Connector Type | LC UPC or Other Conn. | |||||
| Operating Temperature | -5°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Dimension | Plug-in Module 1RU 19” Rack Mount | Plug-in Module 1RU 19” Rack Mount | Plug-in Module 1RU 19” Rack Mount | Plug-in Module 1RU 19” Rack Mount | Plug-in Module 1RU 19” Rack Mount | Plug-in Module 1RU 19” Rack Mount |
