24 Fibers MTP/MPO Cable 2x12F
24 Fiber (2x12F) MTP/MPO Cable for 10G/40G/100G Fiber Optic Networks, Polarity Type A/B/C Optional, Single Mode or Multimode, Double Sheath, Customized Length.
Description
Description
Double Sheath 24 Fiber MTP/MPO Cable (2x 12F to 2x 12F)
IEEE802.3 recommends using 24F MTP/MPO for 100GBASE-SR10, which is two rows of 12 fibers. For 100G applications that require 20 fibers, the ten fibers in the upper row receive and the ten fibers in the lower row transmit, the first and the last fibers in each row are not used, so that achieves 10x10Gbps.
IEEE 802.3 also recoginzes the use of two 12F MTP/MPO connectors beside side by side with each other. The transmitter is on the left and the receiver is on the right. For vertically stacked DMI receptacles, the receiver is on the top and the transmitter is on the bottom.
Arkoptics provides 24 Fibers MTP/MPO trunk cables with two 12F MTP/MPO configurations for 10G to 100G Fiber Optic Network Applications. They are factory pre-terminated and rigorously tested, coming with reliable MTP or MPO connectors.
Ultra-low loss MTP/MPO connectors can reduce signal loss during transmission to support long-distance transmissions and multiple connection areas.
The robust double-jacket sheath enhances crush resistance, ensuring durability and performance over long-distance runs.
Additionally, the optional pulling eye safeguards the breakout section, transferring pulling force to the sleeve for efficient and rapid deployment.
24 Fiber 2x 12F MTP/MPO Multimode Cables are used for 100G Parallel Interconncet to establish a 100G links between 100GBASE-SR4 transceivers. Additional applications such as 40G Parallel Cross Connect between 40GBASE-SR4 transceivers, 40G to 4x 10G Interconnect, and 10G Duplex Cross Connect applications.
24 Fiber 2x 12F MTP/MPO Single Mode Cables are used for 100G Parallel Interconncet between 100GBASE-PLR4, 40G Parallel Cross Connect and 40G to 4x 10G Interconnect applications, as well as 10G Duplex Cross Connect between 10GBASE-LR transceivers.
Features
• 100% factory terminated and tested
• 24 Fibers 2x MTP/MPO-12 on cable ends
• Robust dual sheath round cable structure, customized Length
• 2.0mm breakout saves space for high-density cabling
• Options for Polarity Method A, Method B or Method C
• Options for Male (pinned) or Female (non pinned) on connector ends
• PC, UPC or APC end face polish
• OS2, OM3, OM4 and OM5 fiber available
• Plenum (OFNP) and LSZH cable jacket available
• CPR B1ca/B2ca/Cca/Dca/Eca/Fca available
• Pulling eyes and braided tubing upon request
• Distribute some or all of the fibers in a trunk cable to other areas
• Applicable in backbone installation
Standards Compliance
• EIA/TIA 568.3-D; TIA 604-5(FOCIS 5)
• IEC-61754-7; IEC-61753-1
• GR-326-CORE
• 2011/65/EU and (EU)2015/863
2x 12F MTP UPC Male to 2x 12F MTP UPC Male Trunk Cable, 24 Fibers Polarity A, Multimode OM4, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, OFNP Magenta, 30m
2x 12F MPO UPC Female to 2x 12F MPO UPC Female Trunk Cable, 24 Fibers Polarity B, Multimode OM3, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, LSZH Aqua, 10m
2x 12F MPO UPC Male to 2x 12F MPO UPC Male Trunk Cable, 24 Fibers Polarity C, Multimode OM3, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, LSZH Aqua, 10m
2x 12F MTP APC Male to 2x 12F MTP APC Male Trunk Cable, 24 Fibers Polarity A, Single Mode OS2 G.657A1, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, OFNP Yellow, 40m
2x 12F MPO APC Female to 2x 12F MPO APC Female Trunk Cable, 24 Fibers Polarity B, Single Mode OS2 G.657A1, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, LSZH Yellow, 30m
2x 12F MPO APC Male to 2x 12F MPO APC Female Trunk Cable, 24 Fibers Polarity C, Single Mode OS2 G.657A1, 0.35dB Max, Double Jacket 4.5mm Round Cable, 2.0mm Breakout 0.5m, LSZH Yellow, 10m
Specifications
| MTP®/MPO Trunk Cable Fiber Count |  32 Fibers |  36 Fibers |  48 Fibers |  72 Fibers |  96 Fibers |  144 Fibers |
| Fiber Count | 32 Fiber | 36 Fiber | 48 Fiber | 72 Fiber | 96 Fiber | 144 Fiber |
| Bundle Configuration | 4x8F/2x16F | 3x12F | 4x12F/6x8F/2x24F | 6x12F/3x24F | 8x12F/4x24F | 12x12F/6x24F |
| MT Ferrule | Base-12/Base-16 | Base-12 | Base-12/Base-24 | Base-12/Base-24 | Base-12/Base-24 | Base-12/Base-24 |
| Polarity | Type A / Type B / Type C | |||||
| Connector Type | Male/Female Elite MTP®/MPO Connector | |||||
| Connector Color | OS2 Yellow / OM3 Aqua / OM4 Magenta / OM5 Lime Green | |||||
| Connector Boot Color | Green/Black/Red/Gray or Others | |||||
| Fiber Mode | Single Mode: OS2 G.652/G.657 Multimode: OM1/OM2/OM3/OM4/OM5 | |||||
| Cable Jacket | Plenum (OFNP) / Low Smoke Zero Halogen (LSZH) / Riser (OFNR) | |||||
| Cable Jacket Color | G.652 and G.657: Yellow OM1 and OM2 Orange / OM3 Aqua / OM4 Aqua or Magenta / OM5 Lime Green | |||||
| Trunk Cable Diameter | 4x8F: 9.5mm 2x16F: 7.2mm | 3x12F: 9.3mm | 4x12F: 9.5mm 6x8F: 11.5mm 2x24F: 7.2mm | 6x12F: 11.7mm 3x24F: 9.3mm | 8x12F: 13.5mm 4x24F: 9.5mm | 12x12F: 17.3mm 6x24F: 11.7mm |
| Breakout Diameter | 3.0mm | |||||
| Pulling Eye | Customized | |||||
| Braided Tubing | Customized | |||||
| Insertion Loss | Elite Low Loss ≤0.35dB(Typical: SM≤0.25dB; MM≤0.20dB) | |||||
| Return Loss | Single Mode: UPC≥50, APC≥60 Multimode: ≥20dB | |||||
| Mating Durability | 50 matings, ≤0.30dB change | |||||
| Attenuation | Single Mode: ≤0.4dB/km at 1310nm; ≤0.3dB/km at 1550nm Multimode OM3/OM4/OM5: ≤3.5dB/km at 850nm, ≤1.5dB/km at 1300nm | |||||
| Minimum Bend Radius | 20x OD Cable Diameter | |||||
| Maximum Tensile | Long Term 300N; Short Term 1000N | |||||
| Operating Temperature | -20°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Standards Compliance | EIA/TIA 568.3-D; TIA 604-5(FOCIS 5) IEC 61754-7; IEC 61753-1 GR-326-CORE 2011/65/EU and (EU)2015/863 | |||||
