24 Fibers MTP/MPO Cable
24 Fiber MTP/MPO Patch Cables for 20 fiber parallel optical transceiver applications, such as 100G CFP SR10 and 100G CXP SR10, to establish 100G links between devices. Single Mode or Multimode. Customized Length.
Description
Description
24 Fiber MTP/MPO Cables for 100GBASE-SR10 Transceivers
IEEE802.3 recommends using 24F MTP/MPO for 100GBASE-SR10, which is two rows of 12 fibers. For 100G applications that require 20 fibers, the ten fibers in the upper row receive and the ten fibers in the lower row transmit, the first and the last fibers in each row are not used, so that achieves 10x10Gbps.
24 Fiber MTP/MPO Multimode Cables are used for high-density trunk and direct connection of two 100GBASE-SR10 CFP or CXP transceivers in a 100G network(10 Send - 10 Receive):
100G CFP SR10 links between two Juniper, Finisar or Cisco CFP transceivers (100GBASE-SR10).
100G CFP2 SR10 links between two Juniper, Finisar or Cisco CFP2 transceivers (100GBASE-SR10).
100G CPAK SR10 links between two Cisco CPAK transceivers (CPAK-100G-SR10).
100G CXP SR10 links between two Cisco CXP transceivers (CXP-100G-SR10).
100G CXP SR12 links between two Cisco CXP transceivers (CXP-100G-SR12).
Other 100G links between patch panels and transceivers.
24 Fiber MTP/MPO Single Mode Cables are typically used for 100G CPAK SR10 links between two Cisco CPAK transceivers (CPAK 10x10G-LR).
When the 24F MTP/MPO connector supports 400GBASE-SR8, there are only 16 active channels within a total of 24 positions. There are four transmission fibers on the left side of each row and four receiving fibers on the right side of each row. The four center positions in each row are not used. Each fiber with a speed of 50Gbps which supports 400GbE as a total.
Standards Compliance
• EIA/TIA 568.3-D; TIA 604-5(FOCIS 5)
• IEC-61754-7; IEC-61753-1
• GR-326-CORE
• 2011/65/EU and (EU)2015/863
Features
• 100% factory terminated and tested
• Low insertion loss and high return loss
• Available in US Conec MTP® or Senko/Nissin/HANKUSAN MPO
• Options for Male (pinned) or Female (non pinned) on connector ends
• Options for Polarity Type A or Polarity Type B
• PC, UPC or APC end face polish
• OS2, OM3, OM4 and OM5 fiber available
• Plenum (OFNP) and LSZH cable jacket available
• CPR B1ca/B2ca/Cca/Dca/Eca/Fca available
• Pulling eyes upon request
• Distribute some or all of the fibers in a trunk cable to other areas
• Applicable in backbone installation
• RoHS compliant
Specifications
| Fiber Count | 4/8/12/16/24/32 Fibers MTP®/MPO Patch Cable | |||||
| Polarity | Type A; Type B; Type C (TIA-568.3-D) | |||||
| Connector Ferrule | Base-8/Base-12/Base-16/Base-24/Base-32 | |||||
| Connector Type | Male/Female | |||||
| Connector Color | Elite Low Loss- OS2 Yellow / OM3 Aqua / OM4 Magenta / OM5 Lime Green Standard- OS2 Green / OM3 Aqua / OM4 or Magenta / OM5 Lime Green | |||||
| Connector Boot Color | Green/Black/Red/Gray or Others | |||||
| Pulling Eye | Customized | |||||
| Fiber Mode | Single Mode OS2: G.652/G.657 Multimode: OM1/OM2/OM3/OM4/OM5 | |||||
| Cable Jacket | Plenum (OFNP) / Low Smoke Zero Halogen (LSZH) / Riser (OFNR) | |||||
| Cable Jacket Color | G.652 and G.657 Yellow OM1 and OM2 Orange / OM3 Aqua / OM4 Aqua or Magenta / OM5 Lime Green | |||||
| Cable Outer Diameter | 3.0mm Mini Core for 4F/8F/12F/16F/24F; 3.5mm for 32F | |||||
| Insertion Loss | Elite Low Loss: ≤0.35dB(Typical: SM≤0.25dB; MM≤0.20dB) Standard Loss: ≤0.75dB(Typical≤0.4dB) | |||||
| Return Loss | Single Mode: UPC≥50, APC≥60 Multimode: ≥20dB | |||||
| Mating Durability | 50 matings, ≤0.30dB change | |||||
| Attenuation | Single Mode: ≤0.4dB/km at 1310nm; ≤0.3dB/km at 1550nm Multimode OM3/OM4/OM5: ≤3.5dB/km at 850nm, ≤1.5dB/km at 1300nm | |||||
| Minimum Bend Radius | Single Mode:10mm; Multimode: 7.5mm | |||||
| Maximum Tensile | Long Term 80N; Short Term 240N | |||||
| Operating Temperature | -20°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Standards Compliance | EIA/TIA 568.3-D; TIA 604-5(FOCIS 5) IEC 61754-7; IEC 61753-1 GR-326-CORE 2011/65/EU and (EU)2015/863 | |||||
