Name: 8 Channel CWDM Single Fiber
SKU: MNK-001-1-5-2-1-2-2-1
Price: 10.00 USD
Availability: InStock

Description

Fiber optic communications typically use fiber pairs for bidirectional communication, as is the case with most optical transceivers using duplex patch cords.

Single fiber multiplexers are also possible in passive CWDM solutions, and Arkoptics has developed a full range of CWDM single fiber multiplexers and OADMs to meet these requirements.

Single fiber CWDM should be used in pairs to transmits and receives different wavelengths into a fiber in the opposite direction. If Side A module plug and plays at one end, them Side B module must be at the other end.

8 Channel Single Fiber CWDM

8 Bi-directional Channels Skip Water-Peak 1390nm & 1410nm

8CH CWDM single fiber solution is more efficient and economical for many applications and scenarios, and provides the same performance and throughput, saving fiber resources required for WDM transmission. 8 bidirectional channels use 1270-1590nm / 1290-1610nm, and the water peak wavelengths 1390nm and 1410nm will be skipped. It is passive without electricity, featuring low insertion loss and excellent stability based on thin film filter technology. Low-profile modular design, fits in Arkoptics 2-slot 1U panel chassis.

Custom Solution Tailored to Your Needs

Single Fiber CWDM Mux Demux

The single fiber CWDM Mux Demux can carry signals through only one fiber to realize simultaneous transmission of optical signals in two directions, and the signals in two directions cannot be the same wavelength. In both single and dual fiber system, CWDM Mux Demux must work in pairs for transmission.

Dual Fiber CWDM Mux Demux

Different with single fiber, the dual fiber CWDM Mux Demux carries signals with two fibers. One fiber is used for the transmit direction and the other is used for the receive direction. In dual fiber transmission system, the same wavelength is normally used in both the transmit and receive directions.

Specifications


	4CH CWDM	8CH CWDM	8CH CWDM	9CH CWDM	16CH CWDM	18CH CWDM
Channel	4CH+UPG	8CH+MON+UPG	8CH+MON+UPG	9CH	16CH Mux Demux	18CH+MON
Transmission	Dual Fiber	Single Fiber	Dual Fiber	Single Fiber	Dual Fiber	Dual Fiber
Channel Center Wavelength	1270-1330nm or 1550-1610nm or 1470,1490,1590,1610nm	1270-1590nm 1290-1610nm Skip 1390,1410nm	1470-1610nm or 1270-1450nm Skip 1390,1410nm	1270-1590nm 1290-1610nm	1310-1610nm or Custom	1270-1610nm
Technology Type	TFF	TFF	TFF or Free-Space	TFF	TFF	TFF
Channel Spacing	20nm
Channel Passband	λc ±6.5nm or ±7nm
Link Loss per Channel	≤ 2.0dB	≤ 4.5dB	≤ 3.5dB	≤ 4.0dB	≤ 4.0dB	≤ 4.5dB
Insertion Loss per Channel	≤ 1.2dB	≤ 3.5dB	≤ 2.5dB	≤ 3.0dB	≤ 3.0dB	≤ 3.0dB
Insertion Loss Monitor Port	N/A	≤ 24dB	≤ 24dB	N/A	N/A	≤ 24dB
Insertion Loss UPG Port	≤ 1.2dB	≤ 3.5dB	≤ 2.5dB	N/A	N/A	N/A
Channel Isolation	Adjacent≥30dB; Non-adjacent≥45dB
Passband Ripple	≤ 0.5dB
Directivity	≥50dB
Return Loss	≥45dB
Polarization Dependent Loss	≤ 0.2dB
Polarization Mode Dispersion	≤ 0.2ps
Power Handling	≤ 500mW
Fiber Type	ITU-T G657 A1
Connector Type	LC UPC or Other Conn.
Operating Temperature	-5°C to +70°C or -40°C to +85°C
Storage Temperature	-40°C to +85°C
Dimension	Plug-in Module 1RU 19” Rack Mount	Plug-in Module 1RU 19” Rack Mount	Plug-in Module 1RU 19” Rack Mount	Plug-in Module 1RU 19” Rack Mount	120x80x18mm ABS 1RU 19” Rack Mount	120x80x18mm ABS 1RU 19” Rack Mount