8 Fibers MTP/MPO Cable
8 Fiber MTP/MPO Patch Cable for 8 Fiber Parallel Optical Transceivers Applications, such as 40G QSFP+, 100G QSFP28, 400G OSFP, and 400G QSFP-DD optics connection. 4 fiber for transmission, 4 fiber for signal reception. Singlemode or Multimode. Customized Length.
Description
Description
8 Fiber MTP/MPO Cables for 40G/100G/400G Transceivers
MTP/MPO is a multi-fiber connector that integrates eight, twelve, or twenty-four fibers into a single ferrule, allowing for the high-density deployment of high-speed LAN and data center applications in a single ferrule configuration. MTP/MPO cables allow for the seamless migration to higher data rates in the data center when used in conjunction with our trunk cables. They are typically used for patching within a cabinet. It is a cost-effective alternative to time-consuming field termination and designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.
The 8 Fiber MTP/MPO patch cables are typically used for direct connections between two 40G QSFP+, 100G QSFP28, 400G OSFP or 400G QSFP-DD transceiver modules. The four fibers on the left for transmission, and the four fibers on the right for signal reception, and the inner four fibers are not used.
Arkoptics provides 8 Fibers MTP/MPO patch cables with options for polarity Type A, Type B or Type C. They are factory pre-terminated and rigorously tested. Both MTP and MPO connectors are available with pinned (Male) or non pinned (Female) versions. They are compatible with IEC-61754-7 and TIA-604-5. Ultra-low loss MTP/MPO connectors can reduce signal loss during transmission to support long-distance transmissions and multiple connection areas.
Standards Compliance
• EIA/TIA 568.3-D; TIA 604-5(FOCIS 5)
• IEC-61754-7; IEC-61753-1
• GR-326-CORE
• 2011/65/EU and (EU)2015/863
Features
• 100% factory terminated and tested
• Low insertion loss and high return loss
• Available in US Conec MTP® or Senko/Nissin/HANKUSAN MPO
• Options for Male (pinned) or Female (non pinned) on connector ends
• Options for Polarity Type A or Polarity Type B
• PC, UPC or APC end face polish
• OS2, OM3, OM4 and OM5 fiber available
• Plenum (OFNP) and LSZH cable jacket available
• CPR B1ca/B2ca/Cca/Dca/Eca/Fca available
• Pulling eyes upon request
• Distribute some or all of the fibers in a trunk cable to other areas
• Applicable in backbone installation
• RoHS compliant
Specifications
| Fiber Count | 4/8/12/16/24/32 Fibers MTP®/MPO Patch Cable | |||||
| Polarity | Type A; Type B; Type C (TIA-568.3-D) | |||||
| Connector Ferrule | Base-8/Base-12/Base-16/Base-24/Base-32 | |||||
| Connector Type | Male/Female | |||||
| Connector Color | Elite Low Loss- OS2 Yellow / OM3 Aqua / OM4 Magenta / OM5 Lime Green Standard- OS2 Green / OM3 Aqua / OM4 or Magenta / OM5 Lime Green | |||||
| Connector Boot Color | Green/Black/Red/Gray or Others | |||||
| Pulling Eye | Customized | |||||
| Fiber Mode | Single Mode OS2: G.652/G.657 Multimode: OM1/OM2/OM3/OM4/OM5 | |||||
| Cable Jacket | Plenum (OFNP) / Low Smoke Zero Halogen (LSZH) / Riser (OFNR) | |||||
| Cable Jacket Color | G.652 and G.657 Yellow OM1 and OM2 Orange / OM3 Aqua / OM4 Aqua or Magenta / OM5 Lime Green | |||||
| Cable Outer Diameter | 3.0mm Mini Core for 4F/8F/12F/16F/24F; 3.5mm for 32F | |||||
| Insertion Loss | Elite Low Loss: ≤0.35dB(Typical: SM≤0.25dB; MM≤0.20dB) Standard Loss: ≤0.75dB(Typical≤0.4dB) | |||||
| Return Loss | Single Mode: UPC≥50, APC≥60 Multimode: ≥20dB | |||||
| Mating Durability | 50 matings, ≤0.30dB change | |||||
| Attenuation | Single Mode: ≤0.4dB/km at 1310nm; ≤0.3dB/km at 1550nm Multimode OM3/OM4/OM5: ≤3.5dB/km at 850nm, ≤1.5dB/km at 1300nm | |||||
| Minimum Bend Radius | Single Mode:10mm; Multimode: 7.5mm | |||||
| Maximum Tensile | Long Term 80N; Short Term 240N | |||||
| Operating Temperature | -20°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Standards Compliance | EIA/TIA 568.3-D; TIA 604-5(FOCIS 5) IEC 61754-7; IEC 61753-1 GR-326-CORE 2011/65/EU and (EU)2015/863 | |||||
