DWDM EDFA Amplifier
Integrated 1U DWDM EDFA Fiber Amplifier to Compensate the Optical Signal Power in Transmission Line and Amplify Optical Signals up to 96 Channels at 50GHz and 100GHz C band.
Description
Description
1U Integrated DWDM EDFA Amplifier
BA(Booster Amplifier) is commonly used in the system sending end to improve the system into the fibre optical power. LA(Line Amplifier) is commonly used in the line relay section to compensate for the loss of optical power on the line. PA(Pre-Amplifier) is commonly used in the system receiving end, to improve the system to receive optical power.
The Integrated DWDM EDFA Fiber Amplifier 1U Rackmount is designed to compensate the power of the signal light in the transmission link and extend the transmission distance of the optical signal. It features characters of flat gain, locked gain, low noise index, etc. It’s an indispensable and important device for DWDM system, high speed system and all-optical network long-distance transmission.
- Low noise figure: typical 5.0dB.
- High flatness: typical 1dB.
- Support the unified amplification of 48CH/96CH DWDM signal of C band.
- Redundancy hot swap power module: 110/220V AC and 48V DC can plug mix.
- With LCD display screen, it can display the optical power value and set the working mode: AGC or APC Mode.
- Perfect network interface: RJ45 and RS232 industrial standard interface.
- Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port access.
Specifications
| Integrated DWDM EDFA Optical Amplifier | |||
| Wavelength Range | Standard type 1529nm~1561nm | ||
| Extension type 1528nm~1568nm | |||
| Input Power Range | Booster Amplifier (BA): -15dBm~+5dBm Line Amplifer (LA): -35dBm~-7dBm Pre-Amplifier (PA): -35dBm~-7dBm | ||
| Gain Range | 10dB~30dB | ||
| Noise Figure | 4.5dB~6dB | ||
| Gain Flatness | 1.0dB | ||
| Input/Output Isolation | 30dB | ||
| Input/Output Return Loss | 45dB | ||
| Output Pump Leakage | -30dBm | ||
| Polarization Dependent Loss | 0.5dB | ||
| Polarization Mode Dispersion | 0.5ps | ||
| Management Functions | Display the optical power value and set the working mode: AGC or APC Mode. | ||
| Management Methods | Host computer software | ||
| Interface | Web: RJ45 and RS232 Optical: LC/UPC or others | ||
| Operating Temperature | -10°C to +50°C | ||
| Storage Temperature | -40°C to +85°C | ||
| Relative Humidity | 5% ~ 95% | ||
| Power Consumption | <30W | ||
| Dimension | 1U Rackmount | ||
| Safety and EMC Compliance | Complies with FCC, UL, CE, TUV, CSA standards | ||
