MPO-16 to 2x MPO-8 Conversion Cable
MPO-16 APC Female to 2x MPO-8 UPC Female Crossover Elite Conversion Cable, MPO 1×2 Breakout for 400G to 2x 200G Direct Connect or 200GBASE-SR8 QSFP-DD to two 100GBASE-SR4 QSFP28 Link
Description
16 Fiber MPO/MTP-16 Conversion Cables 1x2 Breakout
MPO-16 APC to 2 x MPO-8 UPC Breakout Cable converts from 16 Fibers to 8 Fibers for 100% Fiber Utilizations. The two 8 Fibers MPO (Base-12) connectors at breakout end use only 8 active fibers to transmit light and 4 inactive fibers not connected. The MPO-16 Angled Polished Connector has a 8-degree polished angle to deflect internal optical back reflections from entering the transceivers and distorting the signal quality. The two 8 Fibers MPO(Base-12) UPC (Ultra-flat Polished Connector) are typically used in 4x50G-PAM4(200G) and 4x25G-NRZ(100G).
MPO 16F to 2x8F Breakout Cable is typically designed for linking two NVIDIA InfiniBand 200G QSFP56 or optical QSFP56 transceivers transmission to NVIDIA 400G QSFP-DD or optical QSFP-DD/OSFP transceiver transmission. Compared to purchasing and installing separate Breakout cassettes, using MTP® Breakout cables is more cost-effective and lower-loss.
Ultra-low loss MPO connectors can reduce signal loss during transmission to support long-distance transmissions and multiple connection areas. Optional robust double jacket cable to enhance crush resistance, ensuring durability and performance over long-distance runs. Additionally, the optional pulling eye safeguards the breakout section, transferring pulling force to the sleeve for efficient and rapid deployment. Rigorous cable production testing ensures best out-of-the-box installation experience, performance, and durability.
Standards Compliance
• EIA/TIA 568.3-D; TIA 604-5(FOCIS 5)
• IEC-61754-7; IEC-61753-1
• GR-1435-CORE
• 2011/65/EU and (EU)2015/863
Features
• MPO/MTP®-16 Conversion Cable 1x2 Breakout Configuration
• 400G QSFP-DD/OSFP and 200G QSFP6 transceivers for 400G to 2x200G linking
• Link between 200GBASE-SR8 QSFP-DD and two 100GBASE-SR4 QSFP28
• 100% factory terminated and tested
• 0.35dB Elite Low Loss Connector
• Available in US Conec MTP® or Senko/Nissin/HANKUSAN MPO
• Female to Female (non pinned) on connector ends
• MTP®/MPO-16 APC polish, 2x MTP®/MPO-8 UPC polish
• Standard Cross over Polarity Type B
• OM3, OM4 and OM5 fiber available
• Flexible round cable structure, customized Length
• Plenum (OFNP) and LSZH cable jacket available
• CPR B1ca/B2ca/Cca/Dca/Eca/Fca available
• RoHS compliant
Specifications
| MTP®/MPO Conversion Cable Breakout Type |  1×2 Y Breakout |  1×2 Y Breakout |  1×2 Y Breakout |  1×3 Breakout |  2×3 Breakout | |
| Conversion Configuration | MPO-12 to 2x MPO-4 | MPO-16 to 2x MPO-8 | MPO-24 to 2x MPO-12 | MPO-24 to 3x MPO-8 | 2x MPO-12 to 3x MPO-8 | |
| Polarity | Type B | Crossover(Type B) | Type A | Type B | Type A | |
| Connector Ferrule | Base-12 / Base-16 / Base-24 | |||||
| Connector Type | Male/Female | |||||
| Connector Color | Single Mode: Yellow/Green/Blue Multimode: OM3 Aqua / OM4 Magenta / OM5 Lime Green | |||||
| Connector Boot Color | Green/Black/Red/Gray or Others | |||||
| Fiber Mode | Single Mode OS2 G.652/G.657 Multimode OM3/OM4/OM5 | |||||
| Cable Jacket | Plenum (OFNP) / Low Smoke Zero Halogen (LSZH) / Riser (OFNR) | |||||
| Cable Jacket Color | Single Mode OS2 G.652 and G.657: Yellow Multimode: OM3 Aqua / OM4 Magenta / OM5 Lime Green | |||||
| Cable Diameter | 3.0mm Mini Core Cable (Ribbon Cable upon Request) | |||||
| Breakout Leg Diameter | 3.0mm Mini Core Cable (Ribbon Cable upon Request) | |||||
| Dual Sheath | Customized | |||||
| Pulling Eye | Customized | |||||
| Insertion Loss | MTP®/MPO Elite Low Loss: ≤0.35dB(Typical: SM≤0.25dB; MM≤0.20dB) MTP®/MPO Standard Loss: SM≤0.75dB; MM≤0.6dB | |||||
| Return Loss | MTP®/MPO Single Mode: UPC≥50, APC≥60; Multimode: ≥20dB | |||||
| Mating Durability | 50 matings, ≤0.30dB change | |||||
| Attenuation | Single Mode: ≤0.32dB/km at 1310nm; ≤0.18dB/km at 1550nm Multimode OM3/OM4/OM5: ≤2.3dB/km at 850nm, ≤0.6dB/km at 1300nm | |||||
| Minimum Bend Radius | Single Mode: 10mm; Multimode: 7.5mm | |||||
| Maximum Tensile | Long Term 80N; Short Term 240N | |||||
| Operating Temperature | -20°C to +70°C | |||||
| Storage Temperature | -40°C to +85°C | |||||
| Standards Compliance | TIA/EIA 568.3-D; TIA/EIA-604-5 IEC-61754-7; IEC-61753-1 GR-1435-Core 2011/65/EU and (EU)2015/863 | |||||
